NO stock
Pilot rc 1/8 F16 1.81m (71.3″) color scheme 02, include retracts.
1.8m 1/8 Jet with normal tail pipe, UAT, fuel tank, fuel dot, fuel tank vent, servo extension wire, hardware. Gear door preisntalled. With retract gear. No Cockpit Set.
PECIFICATIONS:
| Model: |
1/8 F16 |
| Wingspan: |
52.9″ (1,344mm) |
| Length: |
71.3″ (1.81mm) – Plus pitot tube |
| Weight: |
17.8lbs (7.85kg) |
*Please note that the production version comes with a clear canopy.
FEATURES:
- Full composite construction, lightweight and strong
- Two piece wing and two piece full flying stabiliser, both fully removeable
- Painted outside the mold so no seam lines
- Easily detachable ventral fins, helps in place with just two screws
INCLUDED HARDWARE:
- Complete air frame (including fibreglass control horns)
- Carbon fibre wing-tubes
- Servo extension leads
- Fixed Dual wall thrust pipe (for 60-100N turbines)
- Fuel tank (2000ml) and UAT (250ml)
- Pre-prepared pushrods with ball links
- Pre-glued control horns
Landing gear combo:
Pilot-RC 1/8 F16 kit with gear doors installed
Pilot-RC electric landing gear & brakes set
Does not include vector thrust pipe or cockpit set
REQUIRED HARDWARE:
Turbine: 60-100N
Servos: x9
x5 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder
x4 middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Еще
Countries.jpg)